天津市京達金屬涂層有限公司

Cn |
News

精湛的應用水平 Professional Laser Application Level

Arc spraying zincArc spraying aluminumArc spraying copperSpray zinc aluminum alloySprayed Al Mg alloySand blasting and rust removalElectrostatic sprayingSpray stainless steelCold spray zincplasma spraying
電弧噴鋅
It has the strongest practicability, fast construction speed and excellent quality.
One of the representative thermal spraying technologies

Arc spraying zinc belongs to the category of thermal spraying technology. The so-called arc spraying zinc, in short, is through zinc spraying equipment, and under the action of current, with the help of high-pressure air, the hot melt liquid zinc is high-speed projected to the coating (the coating can be steel, metal alloys, ceramics, plastics, etc.), in order to form a dense and uniform zinc layer on the surface of the coating, so as to achieve the coating. Construction method with anticorrosion, decoration or some special purpose.

Understand more

電弧噴鋁
Long service life and cost saving
Less harmful to human health; strong bonding strength

Thermal spraying aluminium is a process for preparing coatings and has become one of the new technologies for metal surface protection. In the past, hot spraying aluminium technology was mainly used in the local parts of container manufacture, shipbuilding industry and important anti-corrosion parts of hydraulic engineering. With the development of China's logistics industry, large tanks have been established one after another, and hot spraying aluminium technology has been gradually applied to the inner wall protection of large storage tanks to store special materials.

Understand more

電弧噴銅
High-quality products and humanized services
Strictly comply with GB/T 19001-2008 "Quality Management System" standard requirements

Arc spraying is one of the most widely used thermal spraying methods in practical applications such as corrosion protection of steel structures, wear resistance and maintenance of mechanical parts. Arc spraying system is generally composed of special power supply, control device, arc spraying gun, wire feeder and compressed air supply system.

Understand more

噴鋅鋁合金
Coatings with abrasion resistance, corrosion resistance, heat insulation, conductivity, insulation, sealing, lubrication and other special mechanical physical and chemical properties

Spraying is a method of spraying on the surface of the coated object by spraying gun or dish atomizer and dispersing into uniform and fine droplets by means of pressure or centrifugal force. It can be divided into air spraying, air-free spraying, electrostatic spraying and various derivative methods of the above basic spraying forms, such as high flow and low pressure atomization spraying, thermal spraying, automatic spraying, multi-group spraying, etc.

Understand more

噴鋁鎂合金
Good heat dissipation, anti-electromagnetic interference and electromagnetic shielding
Magnesium alloys have high strength-to-mass ratio and certain bearing capacity.

Aluminum is the main element of Al-Mg alloy sheet, and a small amount of magnesium or other metal materials are added to strengthen its hardness. The aluminium alloy with Mg as the main additive element is also called anti-rust aluminium alloy because of its good corrosion resistance. Because it is metal itself, its thermal conductivity and strength are particularly prominent.

Understand more

噴砂除銹
Sandblasting and rust removal materials, namely, sandblasting abrasives, are generally divided into artificial abrasives and natural abrasives.

Sandblasting rust removal is to use compressed air as the power to form a high-speed jet beam to spray the material (garnet sand, copper ore sand, quartz sand, diamond sand, iron sand, Hainan sand) onto the surface of the workpiece to be treated at high speed, so that the appearance or shape of the workpiece surface changes.

Understand more

靜電噴涂
Electrostatic spraying can be divided into pure electrostatic atomization and electrostatic atomization with additional energy.

Electrostatic spraying is a kind of coating method which uses corona discharge principle to charge negatively the atomized coating under the action of high voltage direct current electric field and adsorb it on the surface of charged positive base. Electrostatic spraying equipment consists of spraying gun, spraying cup and high voltage power supply for electrostatic spraying.

Understand more

噴不銹鋼
Stainless steel is a special material. Effective measures should be taken in the production process to avoid the occurrence of corrosion conditions and inducements.

There are many kinds of surface pretreatment methods for stainless steel metal substrates, which are mainly selected according to the structure characteristics, size and output of the coatings. The main purpose of pretreatment is to remove foreign bodies on the surface of the substrate and obtain appropriate surface roughness to facilitate better adhesion of the coating. Traditional surface pretreatment methods include grinding, pickling, passivation and sand blasting.

Understand more

冷噴鋅
Excellent primer, good matching;
Cold spraying zinc can conduct static electricity.

This product is a one-component zinc-rich coating with high zinc content. It is a zinc-plating coating made up of zinc powder, volatile solvent and organic resin with purity higher than 99.9%. Compared with other two-component zinc-rich coatings or other one-component products, zinc content in cold spraying zinc coatings is very high (more than 96% zinc in dry film).

Understand more

等離子噴涂
A Technology of Material Surface Strengthening and Modification
It has the properties of wear resistance, corrosion resistance, high temperature oxidation resistance, electrical insulation, heat insulation, radiation protection, wear reduction and sealing, etc.

Plasma spraying technology is a method of using plasma arc driven by direct current as heat source, heating ceramics, alloys, metals and other materials to melt or semi-melt state, and spraying at high speed to the surface of pre-treated workpiece to form a solid surface layer.

Understand more

檢測設備

Understand more

集裝箱噴鋅

Understand more

完善的解決方案 Professional Laser Solution

LASER SOLUTION FOR MOBILE PHONE INDUSTRYArc Spraying Aluminum SolutionSolution of arc spraying copperSolution of Spraying Zinc Aluminum AlloySolution of Spraying Aluminum and Magnesium AlloysSolution of Spray Painting ProcessingSandblasting rust removal solution
  • 電弧噴鋅解決方案LASER SOLUTION FOR MOBILE PHONE INDUSTRY

    With the technological progress of microelectronics industry and people's pursuit of personalization of mobile phones, fine spraying processing technology will play an increasingly important role in mobile phone manufacturing. It not only makes up for the shortcomings of traditional processing methods, but also creates considerable economic benefits for the mobile phone industry.

    Understand more

  • 電弧噴鋁解決方案Arc Spraying Aluminum Solution

    Understand more

  • 電弧噴銅解決方案Solution of arc spraying copper

    Understand more

  • 噴鋅鋁合金解決方案Solution of Spraying Zinc Aluminum Alloy

    Understand more

  • 噴鋁鎂合金解決方案Solution of Spraying Aluminum and Magnesium Alloys

    Understand more

  • 噴漆加工解決方案Solution of Spray Painting Processing

    Understand more

  • 噴砂除銹解決方案Sandblasting rust removal solution

    Understand more

完善的服務 High Efficiency Service

Common problem

What problems do you encounter in the use process? Here we provide you with one-stop solutions and services.

Regular maintenance

Spraying plastic can not only prolong the service life of equipment, but also make the equipment stable and efficient production.

Rapid maintenance

Fast Maintenance A We have a perfect after-sales team and established a perfect service network.

Software upgrade

Software upgrades not only enable devices to get the latest functionality, but also improve operational stability.

Hardware transformation

Perfect hardware transformation scheme and technical support to meet customer's individualized processing needs

automation

Help customers to design automation system to achieve fast and efficient customer processing

服務網絡 Service Net

天津市京達金屬涂層有限公司

Tianjin ZhengQian Metal Coating Co., Ltd. is a well-known enterprise in the field of thermal spraying research and application. It integrates the design, processing and research and manufacture of various coatings, such as anticorrosive coatings, wear-resistant coatings, high-temperature coatings, conductive coatings and decorative coatings.and the employees are on duty after formal training and examination.

新聞資訊 News

Industry newsMore

●Electrostatic Theory and Phenomena in Spraying Equipment11.20

●Automation of spraying equipment is the accelerator of spraying industry11.20

●Painting production line, select suitable spraying equipment for you11.20

●Multi-Cyclone Recovery System for Electrostatic Spraying of Powder Coatings11.20

Product knowledgeMore

●How to Select Electrostatic Spraying Equipment11.20

●Matters needing attention in the use of spray painting equipment11.20

●The difference between waterborne coatings and oily coatings11.20

●Function and function of filter cotton11.20

Latest activitiesMore

●Introduction of Electrostatic Spraying Technology11.20

●Warmly congratulate Tianjin Jingda Metal Coating Co., Ltd. on its official website!11.20

Friendship link
企商科技百度

天津市靜?？h陳官屯鎮南高架橋下

2015 Copyright Tianjin ZhengQian Metal Coating Co., Ltd. | ICP Record No: Tianjin ICP Record No. 14003048-1| Web site map

Online Message

Contact Us

Online QQ

Top

Feedback

Dear customer friends, please give us your comments and suggestions through the following table. We will contact you as soon as possible.(all of the following are required)

Your name：
Your phone call：
Your Email：
Your address：
Message：

久久中文字幕综合不卡一区二区-亚洲精品国产电影午夜在线观看-午夜免费视频一区二区-国产日产欧美一级在线观看